SunModo SunBeam
As a permanent part of the building and roof structure, the SunBeam system eliminates any abrasions, moss build up and need of system removal for roof repair or re-roofing. In addition, it provides shading of HVAC equipment, increasing efficiency and faster temperature response. Twenty-year warranty.
Material: High-grade aluminum and 304 stainless steel hardware. Anchor-only attachment.
How it maximizes energy density: The SunBeam system elevates above obstructions such as HVAC, pipes and vents. By spanning over roof obstructions such as HVAC, pipes and vents, the system takes full advantage of the available roof surface thereby maximizing the PV system size. The system can be easily adjusted to account for the multiple roof pitches on site.
Everest Solar D Dome R²
The D Dome R² system is an east/west commercial flat roof solution. The third generation of this product is now rail-less with only five major components and minimal hardware. It sits at a fixed 10-degree pitch and allows for 3.5-in. inter-row spacing. Twenty-year warranty.
Material: Aluminum, ballast with attachment optional. The ballast blocks sit under the panels.
How it maximizes energy density: Everest Solar Systems believes east/west systems are more efficient south of the tropic of cancer. First, an east/west system practically eliminates inter-row spacing which allows more modules on the roof, thus increasing module density. On one internal study, Everest compared a the production of a 10-degree south-facing system with its east/west system in southern California at different azimuths. The south-facing fit 88 modules and had a 14 percent decrease in at the 225-degree azimuth. The D Dome R² system reached 108 modules in the same space and had less than 0.1 percent change between all azimuth angles.
Solar Mounting Solutions
SMS Racking consists of only three major parts that arrive with all hardware pre-inserted allowing for quick single tool installation. The THRU-ITT integrated wire management system allows wiring to remain organized and protected by running wires east-west and north-south internally. Since this racking design does not rely on the panel for integrity, installers can complete racking and wire installation independent of the panel. Twenty-year warranty.
Material: G90 coated steel and optional galvanized steel, aluminum, powder-coated. Ballast only.
How it maximizes energy density: SMS developed an Excel spreadsheet that determines the optimum row-to-row spacing based on the selected solar module, optimum tilt angle, solar azimuth angle, and the altitude angle all specific to install location. By optimizing the length of row-to-row spacers, the SMS system can greatly reduce the amount of redundant material, which in turn will reduce racking cost and avoid installing the modules in a high shadow region. The racks are designed with minimal distance between modules in the east/west direction to eliminate unused area.
Ecolibrium EcoFoot5D and EcoFoot2+
EcoFoot5D 5-Degree and EcoFoot2+ 10-Degree speed installation and simplify logistics for flat-roof installs. Main components are: a base, pre-assembled clamps (integrated bonding without washers) and a wind deflector. The system is black, ASA-PC, UL Listed Resin with a 25-year warranty mounted with ballast, attachments or a mix.
How it maximizes energy density: EcoFoot5D 5-Degree delivers 18.4 percent more power than the 10-degree system and lowers cost per watt. The system maximizes roof density while maintaining the ease and simplicity of EcoFoot. The modular base is small at 7 in. x 16.7 in., and inter-row spacing is a dense 9.9 in., creating a tightly packed array. Stackable bases enable up to 290 kW per pallet, resulting in fewer pallets and minimized shipping, storage and onsite crane use.
— Solar Builder magazine
Leave a Reply
You must be logged in to post a comment.