SnapNrack debuted its all new SpeedSeal Technology last week with SpeedSeal Foot for the Ultra Rail Roof Mount System and SpeedSeal Track for the RL Universal Roof Mount System. This is part of a new generation of roof attachments from SnapNrack that incorporates flashing reliability into a single attachment by using a patent-pending Lag Driven Sealant Technology.
These new SnapNrack SpeedSeal products, SpeedSeal Foot and SpeedSeal Track, allow installers to lag straight to a structural member with no in-between components, and eliminates damage to shingles from the installation process. The simple install process consists of locating a rafter, filling the sealant cavity and securing to the roof. The SpeedSeal Technology takes over, compressing sealant into the cavity, shingle surfaces and lag hole, as the SpeedSeal Foot or SpeedSeal Track is secured to the rafter.
The 100% waterproof solution provides a lasting seal and passes UL 2582 Wind Driven Rain Test and ASTM E2140 Water Column Testing standards.
In order to properly install a rigid metal flashing, a pry bar is needed to “rip up” the shingles and remove the nails. The SpeedSeal Foot and SpeedSeal Track eliminate this process, so the roof remains intact, the way the roofing manufacturer meant it to be, all while installing with faster times. SnapNrack’s tradition of a single tool installation is carried on in the new SpeedSeal Foot and SpeedSeal Track designs with the same ½-in. socket, that is the standard for all components of SnapNrack’s mounting systems.
SnapNrack is now accepting orders for the new SnapNrack SpeedSeal Foot and SpeedSeal Track with standard order lead times.
— Solar Builder magazine